PROBLEM SYMPTOMS TABLE
Troubleshooting · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to the system before inspecting the suspected areas below.
- If the problem occurs in certain locations or times of day, the possibility of wave interference is high.
- If a malfunction occurred after optional components were installed at the dealer, check if there is wave interference from the components.
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom |
Suspected Area |
See page |
| Engine does not start |
Refer to "Engine does not Start" |
Click here
|
| Power source mode does not change to on (IG) or on (ACC) |
Refer to "Power Source Mode does not Change to ON (IG and ACC)" |
Click here
|
| Power source mode does not change to on (IG) |
Refer to "Power Source Mode does not Change to ON (IG)" |
Click here
|
| Power source mode does not change to on (ACC) |
Refer to "Power Source Mode does not Change to ON (ACC)" |
Click here
|