2014-2019 Hiace · Service Manual BODY ELECTRICAL

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from Oct 2014


DESCRIPTION
  1. Smart entry and start system (for Entry Function) data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). In some cases, a malfunction may be occurring in the smart entry and start system. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.


CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT BATTERY VOLTAGE
  1. Measure the vehicle battery voltage.

    Standard voltage:
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the vehicle battery.

← TERMINALS OF ECU (from Oct 2014)DTC CHECK / CLEAR (from Oct 2014) →