2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. E103952E01
    Check that the float moves smoothly between F and E.
    Text in Illustration 
    *a
    F (Upper)
    *b
    E (Lower)

  1. B369526E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 3
    Float level is F (upper)
    13.5 to 16.5 Ω
    Float level is E (lower)
    405.5 to 414.5 Ω

    HINT:
    If the result is not as specified, replace the fuel sender gauge assembly.

    Text in Illustration 
    *a
    Component without harness connected
    (Fuel Sender Gauge Assembly)

← INSTALLATION (from Oct 2014)PRECAUTION (from Oct 2014) →