INSPECTION
Inspection · Vehicles built from Jan 2017
| INSPECT FUEL SENDER GAUGE ASSEMBLY |
Check that the float moves smoothly between F and E.

Text in Illustration *a
F (Upper)
*b
E (Lower)
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
2 - 3
Float level is F (upper)
13.5 to 16.5 Ω
Float level is E (lower)
405.5 to 414.5 Ω
- HINT:
- If the result is not as specified, replace the fuel sender gauge assembly.
Text in Illustration *a
Component without harness connected
(Fuel Sender Gauge Assembly)
