The instrument panel junction block assembly (body ECU) receives the back door lock/unlock request signal from the door control switch or door key cylinder. The instrument panel junction block assembly (body ECU) actives the door lock motor on back door remote control assembly
WIRING DIAGRAM
INSPECTION PROCEDURE
1. INSPECT BACK DOOR REMOTE CONTROL ASSEMBLY
Remove the back door remote control assembly (Click here)
Inspect the back door remote control assembly (Click here).
NG
REPLACE BACK DOOR REMOTE CONTROL ASSEMBLY (Click here)
OK
2. CHECK HARNESS AND CONNECTOR (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY [BODY ECU] - BACK DOOR REMOTE CONTROL ASSEMBLY)