2014-2019 Hiace · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2014


INSPECT SPEED SENSOR NC0 AND SP2

  1. C206284E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Speed Sensor NC0 and SP2)
    If the result is not as specified, replace the speed sensor.

← REMOVAL (Oct 2014 – Dec 2014)INSTALLATION (Oct 2014 – Dec 2014) →