2014-2019 Hiace · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Dec 2014


1. INSTALL SPEED SENSOR SP2
  1. Coat a new O-ring with ATF and install it to the speed sensor SP2.

  1. Install the speed sensor SP2 with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the connector.


2. INSTALL SPEED SENSOR NC0
  1. Coat a new O-ring with ATF and install it to the speed sensor NC0.

  1. Clean the bolt and bolt hole.

  1. Apply adhesive to 2 or 3 threads on the end of the bolt.

    Adhesive:
    Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

  1. Install the speed sensor NC0 with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the connector.

← INSPECTION (Oct 2014 – Dec 2014)COMPONENTS (Oct 2014 – Dec 2014) →