INSPECTION
Inspection · Vehicles built Oct 2014 – Dec 2014
| INSPECT ATF TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Always
79 Ω to 156 kΩ
1 - Body ground
Always
10 kΩ or higher
2 - Body ground
Always
10 kΩ or higher
If the result is not as specified, replace the ATF temperature sensor.Text in Illustration *a
Component without harness connected
(ATF Temperature Sensor)
- HINT:
- If the resistance is not within the specified range at either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.
- Standard Resistance:
ATF Temperature
Specified Condition
20°C (68°F)
10.3 to 13.9 kΩ
120°C (248°F)
0.58 to 0.65 kΩ
