REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1) |
| 2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY |
Remove the 2 bolts. Separate the vane pump oil reservoir assembly.

| 3. REMOVE CRANKSHAFT POSITION SENSOR |
Disconnect the crankshaft position sensor connector.

Separate the connector from the vacuum pipe No.1.
Separate the 3 wire harness clamps.

Remove the bolt and the crankshaft position sensor.
