INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT FAN AND GENERATOR V BELT |
Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.- The belt is cracked.
- The belt is worn out to the extent that the cords are exposed.
- The belt has chunks missing from the ribs.
- The belt is cracked.
Check that the belt fits properly in the ribbed grooves.

Text in Illustration *a
CORRECT
*b
INCORRECT
- HINT:
- Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.
Check that the tensioner indicator mark is within range A shown in the illustration.

If the mark is not within range A, replace the fan and generator V belt.Text in Illustration *a
Bracket Side Indicator
*b
Arm Side Indicator
*c
Fan and Generator V Belt
*d
V-ribbed belt tensioner assembly
- HINT:
- If a new belt has been installed, check that the tensioner indicator mark is within range A.
| INSPECT V-RIBBED BELT TENSIONER ASSEMBLY |
Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise. If a malfunction exists, replace the V-ribbed belt tensioner assembly.
| INSPECT TENSIONER PULLEY |
Turn the pulley, and check that the tensioner bearing moves smoothly and quietly.

If necessary, replace the tensioner pulley.Text in Illustration *a
Turn
