INSTALLATION
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY |
- NOTICE:
- Avoid physical shock to the accelerator pedal.
- Do not disassemble the accelerator pedal assembly.
- This accelerator pedal does not require lubrication.
Do not apply oil or other lubrication to the accelerator pedal rod assembly.
If applied, the accelerator pedal rod assembly must be replaced.
- Avoid physical shock to the accelerator pedal.
Install the accelerator pedal rod assembly with the 2 nuts.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Connect the accelerator pedal rod connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
