2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY

NOTICE:
  1. Avoid physical shock to the accelerator pedal.
  2. Do not disassemble the accelerator pedal assembly.
  3. This accelerator pedal does not require lubrication.
    Do not apply oil or other lubrication to the accelerator pedal rod assembly.
    If applied, the accelerator pedal rod assembly must be replaced.

  1. Install the accelerator pedal rod assembly with the 2 nuts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Connect the accelerator pedal rod connector.


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Apr 2016 – Dec 2016)COMPONENTS (from Oct 2014) →