REMOVAL
Removal / installation · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY |
Disconnect the accelerator pedal rod connector.

Remove the 2 nuts and accelerator pedal rod assembly.
- NOTICE:
- Avoid physical shock to the accelerator pedal rod assembly.
- Do not disassemble the accelerator pedal rod assembly.
- This accelerator pedal does not require lubrication.
Do not apply oil or other lubrication to the accelerator pedal rod assembly.
If applied, the accelerator pedal rod assembly must be replaced.
- Avoid physical shock to the accelerator pedal rod assembly.
