ON-VEHICLE INSPECTION
Inspection · Vehicles built Oct 2014 – Mar 2016
Versions by build date: Oct 2014 – Mar 2016 from Apr 2016
| CHECK TRANSMISSION OIL |
Park the vehicle in a level place.

Remove the transmission filler plug and gasket.
Check that the oil surface is within 5 mm (0.20 in.) below the lowest point of the transmission filler plug opening.
- Oil grade:
- API GL-4
- Viscosity:
- SAE 75W-90
- Capacity:
- 2.6 liters (2.7 US qts, 2.3 Imp.qts)
- NOTICE:
- Problems may occur when the oil level is too high or too low.
- After replacing the oil, drive the vehicle and check the oil level again.
- Problems may occur when the oil level is too high or too low.
Check for oil leakage if the oil level is low.
Install the transmission filler plug and a new gasket.
- Torque:
- 37 N*m{ 377 kgf*cm , 27 ft.*lbf }
