2014-2019 Hiace · Service Manual TRANSMISSION

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Apr 2016

Versions by build date: Oct 2014 – Mar 2016 from Apr 2016


CHECK TRANSMISSION OIL

  1. D025304E01
    Park the vehicle in a level place.

  1. Remove the transmission filler plug and gasket.

  1. Check that the oil surface is within 5 mm (0.20 in.) below the lowest point of the transmission filler plug opening.

    Oil grade:
    TOYOTA Genuine Manual Transmission Gear oil API GL-3 (GL-4) or equivalent
    Viscosity:
    Above -10°C (14°F): SAE 75W-90, 80W or 80W-90
    Below -10°C (14°F): SAE 75W-90
    Capacity:
    2.6 liters (2.7 US qts, 2.3 Imp. qts)

    NOTICE:
    1. Problems may occur when the oil level is too high or too low.
    2. After replacing the oil, drive the vehicle and check the oil level again.

  1. Check for oil leakage if the oil level is low.

  1. Install the transmission filler plug and a new gasket.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

← ON-VEHICLE INSPECTION (Oct 2014 – Mar 2016)COMPONENTS (from Oct 2014) →