2014-2019 Hiace · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. INSTALL NO. 2 SEATBACK SPRING ASSEMBLY LH

2. INSTALL NO. 2 SEATBACK SPRING ASSEMBLY RH

3. INSTALL NO. 2 SEATBACK PAD

4. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY

  1. B107621E01
    Using hog ring pliers, install the No. 2 seatback cover sub-assembly with 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

    HINT:
    Use the same procedures for the RH side and LH side.


5. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY WITH PAD

6. INSTALL REAR SEAT HEADREST SUPPORT

7. INSTALL REAR SEAT HEADREST SUPPORT

8. INSTALL REAR SEATBACK HOLDER (w/ Cup Holder)

  1. B462961
    Engage the 2 guides and 2 clips to install the rear seatback holder.

    HINT:
    Use the same procedures for the RH side and LH side.


9. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY (w/ Assist Grip)

10. INSTALL ASSIST GRIP (w/ Assist Grip)

11. INSTALL REAR SEATBACK SHIELD RH

12. INSTALL REAR SEATBACK SHIELD LH

13. INSTALL REAR SEAT CUSHION SHIELD INNER NO. 1 LH

14. INSTALL REAR SEAT CUSHION SHIELD INNER NO. 1 RH

15. INSTALL REAR SEAT HEADREST ASSEMBLY

16. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107676
    Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


17. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Seat Belt)

  1. B107677
    Install the rear seat lap type belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


18. INSTALL NO. 2 SEAT LEG SUB-ASSEMBLY

  1. B107611
    w/o Seat Belt:

    1. Install the No. 2 seat leg sub-assembly with the 8 bolts.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. w/ Rear seat lap type belt assembly:

    1. Install the No. 2 seat leg sub-assembly with the 8 bolts.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. B105595
    w/ Rear seat 3-point type belt assembly:

    1. Install the No. 2 seat leg sub-assembly with the 7 bolts.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }


19. INSTALL REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)

  1. B105623
    Install the rear seat 3 point type belt assembly with the 2 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the 4 screws.


20. INSTALL NO. 2 SEAT CUSHION PAD

21. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY

  1. B107622E01
    Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly with 16 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. B107623E01
    Using hog ring pliers, install the 5 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


22. INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD

23. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO. 1 (w/ Seat Lap Type Belt Assembly No. 1)

  1. B107681
    Install the seat lap type belt assembly No.1 with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


24. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107678
    Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


25. INSTALL REAR SEAT LEG SIDE COVER NO. 5

  1. except Fourth Row:

    1. B107607
      Install the rear seat leg side cover No. 5.

  1. for Fourth Row:

    1. B462964
      Install the rear seat leg side cover No. 5.


26. INSTALL REAR SEAT LEG SIDE COVER NO. 4

27. INSTALL RECLINING ADJUSTER COVER LH

28. INSTALL RECLINING ADJUSTER COVER RH

29. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO. 2 LH

30. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO. 2 RH
← REASSEMBLY (Oct 2014 – Dec 2016)INSTALLATION (Oct 2014 – Dec 2016) →