2014-2019 Hiace · Service Manual BODY ELECTRICAL

B2450 Initialization has not been Performed

Diagnostic trouble codes · Vehicles built from Oct 2014

DESCRIPTION

The headlight leveling ECU stores this DTC if initialization has not been performed after replacing the ECU.
DTC Code
DTC Detection Condition
Trouble Area
B2450
Initialization of the headlight leveling ECU has not been performed.
  1. Vehicle condition when initializing
  2. Headlight leveling ECU assembly

INSPECTION PROCEDURE

HINT:
After replacing the headlight leveling ECU, initialization of the ECU is necessary (Click here).


1. PERFORM HEADLIGHT LEVELING ECU INITIALIZATION
  1. Perform initialization of the headlight leveling ECU (Click here).


NEXT


2. CHECK FOR DTC
  1. Check for DTCs (Click here).

    OK:
    DTC B2450 output does not occur.

    HINT:
    If the headlight leveling ECU outputs B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU.

Result 
Result
Proceed to
OK
A
NG (for LHD)
B
NG (for RHD)
C


B
REPLACE HEADLIGHT LEVELING ECU ASSEMBLY (Click here)

C
REPLACE HEADLIGHT LEVELING ECU ASSEMBLY (Click here)
A

END


← B2430 LED Headlight LH Circuit Malfunction (+ B2431) (from Jan 2017)B2451 Vehicle Specifications have not been Stored (from Oct 2014) →