2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. REMOVE TIMING BELT
(Click here)

2. REMOVE CRANKSHAFT TIMING PULLEY

  1. A056898E02
    Remove the crankshaft timing pulley.
    If the timing pulley cannot be removed by a screwdriver, remove it with SST.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)


3. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL

  1. A056914E02
    Using a knife, cut off the oil seal lip.

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Do not damage the crankshaft. Tape the screwdriver tip.

← COMPONENTS (from Oct 2014)REMOVAL (from Jan 2017) →