REMOVAL
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE TIMING BELT |
 |
(Click here)
| 2.
REMOVE CRANKSHAFT TIMING PULLEY |
 |
- Remove the crankshaft timing pulley.
If the timing pulley cannot be removed by a screwdriver, remove it with SST.
- SST
- 09950-50013
(09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)
| 3.
REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL |
 |
- Using a knife, cut off the oil seal lip.
Using a screwdriver, pry out the oil seal.
- NOTICE:
- Do not damage the crankshaft. Tape the screwdriver tip.