REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1.
REMOVE FAN AND GENERATOR V BELT |
 |
(Click here)
| 2.
REMOVE CRANKSHAFT PULLEY COVER |
 |
- Remove the 4 bolts and crankshaft pulley cover from the crankshaft pulley.
| 3.
REMOVE CRANKSHAFT PULLEY |
 |
- Using SST, hold the crankshaft pulley and loosen the pulley bolt.
- SST
- 09213-58014
(91551-80840)
09330-00021
- HINT:
- Make sure to leave the pulley bolt screwed into the crankshaft by 2 or 3 threads.
- Using SST, remove the pulley bolt and crankshaft pulley from the crankshaft.
- SST
- 09950-50013
(09951-05010, 09952-05010, 09953-05020, 09954-05021)
| 4.
REMOVE FRONT CRANKSHAFT OIL SEAL |
 |
- Using SST, remove the front crankshaft oil seal from the timing chain cover assembly.
- SST
- 09308-10010
09950-40011
(09957-04010)
09950-60010
(09951-00350)
- HINT:
- After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.