2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT VENTURI ASSEMBLY

  1. Resistance inspection. (Throttle control motor)

    1. A031135
      Using an ohmmeter, measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Terminals
      Temperature
      Resistance
      2 - 1, 3
      at 20°C (68°F)
      18 to 22 Ω
      5 - 4, 6
      at 20°C (68°F)
      18 to 22 Ω

  1. Continuity inspection. (Throttle valve switch)

    1. A072560
      Using an ohmmeter, measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Throttle valve
      Resistance
      Fully open
      Below 1 Ω
      Fully close
      10 KΩ or higher

← REMOVAL (from Oct 2014)INSTALLATION (Oct 2014 – Dec 2014) →