REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1.
SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
SEPARATE AIR CLEANER HOSE NO.2 |
 |
Loosen the bolt, and disconnect the air cleaner hose No.2.
| 3.
REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY |
 |
Disconnect the ventilation hose.
Disconnect the turbo pressure sensor connector.
- Remove the bolt, 3 nuts, intake air connector and gasket.
| 4.
REMOVE VENTURI ASSEMBLY |
 |
- Disconnect the throttle open switch connector.
- Disconnect the throttle control motor connector.
Remove the venturi and gasket.