2014-2019 Hiace · Service Manual ENGINE

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017

HINT:
  1. Use these procedures to troubleshoot the ECD system.
  2. *: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.CUSTOMER PROBLEM ANALYSIS
      NEXT

      3.CONNECT GTS TO DLC3*

        HINT:
        If the display indicates a communication fault with the GTS, inspect the DLC3.

      NEXT

      4.CHECK DTC AND FREEZE FRAME DATA*

        HINT:
        Record or print DTCs and freeze frame data if necessary.

      NEXT

      5.CLEAR DTC AND FREEZE FRAME DATA*
        NEXT

        6.CONDUCT VISUAL INSPECTION
          NEXT

          7.SET CHECK MODE DIAGNOSIS*
            NEXT

            8.CONFIRM PROBLEM SYMPTOMS

              HINT:
              If the engine does not start, perform steps 10 and 12 first.

              Result:
              Result
              Proceed to
              Malfunction occurs
              A
              Malfunction does not occur
              B


            B.
            A

            9.CHECK DTC*

              Result:
              Result
              Proceed to
              Malfunction code
              A
              No malfunction code
              B


            B.
            A

            10.REFER TO DTC CHART*
              NEXT

              11.CONDUCT BASIC INSPECTION

                Result:
                Result
                Proceed to
                Malfunctioning parts not confirmed
                A
                Malfunctioning parts confirmed
                B


              B.
              A

              12.REFER TO PROBLEM SYMPTOMS TABLE

                HINT:
                Refer to Problem Symptoms Table (Click here).

                Result:
                Result
                Proceed to
                Malfunctioning circuit confirmed
                A
                Malfunctioning parts confirmed
                B


              B.
              A

              13.CHECK ECM POWER SOURCE CIRCUIT
                NEXT

                14.CONDUCT CIRCUIT INSPECTION

                  Result:
                  Result
                  Proceed to
                  Malfunction not confirmed
                  A
                  Malfunction confirmed
                  B


                B.
                A

                15.CHECK FOR INTERMITTENT PROBLEMS
                  NEXT

                  16.CONDUCT PARTS INSPECTION
                    NEXT

                    17.IDENTIFY PROBLEM
                      NEXT

                      18.ADJUST AND/OR REPAIR
                        NEXT

                        19.CONDUCT CONFIRMATION TEST
                          NEXT

                          ← SYSTEM DESCRIPTION (from Oct 2014)HOW TO PROCEED WITH TROUBLESHOOTING (Jan 2015 – Nov 2015) →