HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jan 2015 – Nov 2015
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
- HINT:
- Use these procedures to troubleshoot the ECD system.
- *: Use the GTS.
- Use these procedures to troubleshoot the ECD system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 3.CONNECT GTS TO DLC3* |
- HINT:
- If the display indicates a communication fault with the GTS, inspect the DLC3.
| |||||
| 4.CHECK DTC AND FREEZE FRAME DATA* |
- HINT:
- Record or print DTCs and freeze frame data if necessary.
| |||||
| 5.CLEAR DTC AND FREEZE FRAME DATA* |
| |||||
| 6.CONDUCT VISUAL INSPECTION |
| |||||
| 7.SET CHECK MODE DIAGNOSIS* |
| |||||
| 8.CONFIRM PROBLEM SYMPTOMS |
- HINT:
- If the engine does not start, perform steps 10 and 12 first.
- Result:
Result
Proceed to
Malfunction occurs
A
Malfunction does not occur
B
|
|||||
| |||||
| 9.CHECK DTC* |
- Result:
Result
Proceed to
Malfunction code
A
No malfunction code
B
|
|||||
| |||||
| 10.REFER TO DTC CHART* |
| |||||
| 11.CONDUCT BASIC INSPECTION |
- Result:
Result
Proceed to
Malfunctioning parts not confirmed
A
Malfunctioning parts confirmed
B
|
|||||
| |||||
| 12.REFER TO PROBLEM SYMPTOMS TABLE |
- HINT:
- Refer to Problem Symptoms Table (Click here).
- Result:
Result
Proceed to
Malfunctioning circuit confirmed
A
Malfunctioning parts confirmed
B
|
|||||
| |||||
| 13.CHECK ECM POWER SOURCE CIRCUIT |
| |||||
| 14.CONDUCT CIRCUIT INSPECTION |
- Result:
Result
Proceed to
Malfunction not confirmed
A
Malfunction confirmed
B
|
|||||
| |||||
| 15.CHECK FOR INTERMITTENT PROBLEMS |
| |||||
| 16.CONDUCT PARTS INSPECTION |
| |||||
| 17.IDENTIFY PROBLEM |
| |||||
| 18.ADJUST AND/OR REPAIR |
| |||||
| 19.CONDUCT CONFIRMATION TEST |
| |||||