2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


INSPECT CAMSHAFT POSITION SENSOR (w/o Dual VVT-i)
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    950 to 1250 Ω

    If the result is not as specified, replace the camshaft position sensor.

← INSPECTION (Oct 2014 – Dec 2014)INSTALLATION (Oct 2014 – Dec 2014) →