2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


INSPECT CAMSHAFT POSITION SENSOR

  1. A088648E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (G+) - 2 (G-)
      950 to 1,250 Ω at 20°C (68°F)

      If the result is not as specified, replace the camshaft position sensor.

← REMOVAL (from Jan 2015)INSPECTION (from Jan 2015) →