2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


1. REMOVE FRONT SEAT ASSEMBLY RH (w/ Dual VVT-i)
(Click here)

2. REMOVE FRONT DOOR SCUFF PLATE RH (w/ Dual VVT-i)

3. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (w/ Dual VVT-i)
  1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover.


4. REMOVE INTAKE AIR CONNECTOR (w/ Dual VVT-i)
(Click here)

5. REMOVE CAMSHAFT POSITION SENSOR (w/ Dual VVT-i)

  1. A337859
    for Intake Side:

    1. Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor.

  1. for Exhaust Side:

    1. Disconnect the camshaft position sensor connector.

    2. A337861
      Remove the bolt and camshaft position sensor.


6. REMOVE CAMSHAFT POSITION SENSOR (w/o Dual VVT-i)

  1. A086888
    Disconnect the camshaft position sensor connector.

  1. Remove the bolt and the camshaft position sensor.

← REMOVAL (Oct 2014 – Dec 2014)INSPECTION (Oct 2014 – Dec 2014) →