2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT CRANKSHAFT POSITION SENSOR

  1. A074841
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (NE+) - 2 (NE-)
      1,850 to 2,450 Ω at 20°C (68°F)

      If the result is not as specified, replace the crankshaft position sensor.

← REMOVAL (from Oct 2014)INSTALLATION (Oct 2014 – Mar 2016) →