2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT CRANKSHAFT POSITION SENSOR

  1. A074841E08
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    1850 to 2450 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Crankshaft Position Sensor)
    If the result is not as specified, replace the crankshaft position sensor.

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2014) →