TERMINALS OF ECU
System information · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| ECM (1KD-FTV w/ DPF) |


- HINT:
- Each ECM terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
- Use the illustration above as a reference for the ECM terminals.
| Symbols (Terminals No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| NSW (D99-38) - E1 (D99-109) |
B - W-B |
Park neutral switch signal |
Ignition switch ON and shift lever P and N position |
Below 2 V |
| Ignition switch ON and shift lever except P and N position |
11 to 14 V |
|||
| STP (B73-35) - E1 (D99-109) |
Y - W-B |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| Brake pedal is released |
Below 1.5 V |
|||
| CAN+ (D99-40) - E1 (D99-109) |
L - W-B |
CAN communication line |
Ignition switch ON |
Pulse generation (See waveform 5) |
| CAN- (D99-63) - E1 (D99-109) |
Y - W-B |
CAN communication line |
Ignition switch ON |
Pulse generation (See waveform 6) |
| TC (B73-26) - E1 (D99-109) |
G - W-B |
Terminal TC of DLC3 |
Ignition switch ON |
11 to 14 V |
| ECM (1KD-FTV w/o DPF) |


- HINT:
- Each ECM terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
- Use the illustration above as a reference for the ECM terminals.
| Symbols (Terminals No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| NSW (D98-38) - E1 (D98-109) |
B - W-B |
Park neutral switch signal |
Ignition switch ON and shift lever P and N position |
Below 2 V |
| Ignition switch ON and shift lever except P and N position |
11 to 14 V |
|||
| STP (B72-35) - E1 (D98-109) |
Y - W-B |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| Brake pedal is released |
Below 1.5 V |
|||
| CAN+ (D98-40) - E1 (D98-109) |
L - W-B |
CAN communication line |
Ignition switch ON |
Pulse generation (See waveform 5) |
| CAN- (D98-63) - E1 (D98-109) |
Y - W-B |
CAN communication line |
Ignition switch ON |
Pulse generation (See waveform 6) |
| TC (B72-26) - E1 (D98-109) |
G - W-B |
Terminal TC of DLC3 |
Ignition switch ON |
11 to 14 V |
| ECM (2KD-FTV) |


- HINT:
- Each ECM terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
- Use the illustration above as a reference for the ECM terminals.
| Symbols (Terminals No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| NSW (D105-38) - E1 (D105-109) |
B - BR |
Park neutral switch signal |
Ignition switch ON and shift lever P and N position |
Below 2 V |
| Ignition switch ON and shift lever except P and N position |
11 to 14 V |
|||
| STP (B88-35) - E1 (D105-109) |
Y - BR |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| Brake pedal is released |
Below 1.5 V |
|||
| CAN+ (B88-4) - E1 (D105-109) |
L - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (See waveform 5) |
| CAN- (B88-5) - E1 (D105-109) |
Y - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (See waveform 6) |
| TC (B88-26) - E1 (D105-109) |
G - BR |
Terminal TC of DLC3 |
Ignition switch ON |
11 to 14 V |
| TCM |


- HINT:
- Each TCM terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
- Use the illustration above as a reference for the TCM terminals.
| Symbols (Terminals No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| P (O1-13) - E1 (O1-1) |
W - W-B |
P shift position switch signal |
Ignition switch ON and shift lever P position |
11 to 14 V |
| Ignition switch ON and shift lever except P position |
Below 1 V |
|||
| N (O1-14) - E1 (O1-1) |
GR - W-B |
N shift position switch signal |
Ignition switch ON and shift lever N position |
11 to 14 V |
| Ignition switch ON and shift lever except N position |
Below 1 V |
|||
| D (O2-8) - E1 (O1-1) |
W - W-B |
D shift position switch signal |
Ignition switch ON and shift lever D or 3 position |
11 to 14 V |
| Ignition switch ON and shift lever except D or 3 position |
Below 1 V |
|||
| L (O2-10) - E1 (O1-1) |
R - W-B |
L shift position switch signal |
Ignition switch ON and shift lever L position |
11 to 14 V |
| Ignition switch ON and shift lever except L position |
Below 1 V |
|||
| 2 (O2-11) - E1 (O1-1) |
Y - W-B |
2 shift position switch signal |
Ignition switch ON and shift lever 2 position |
11 to 14 V |
| Ignition switch ON and shift lever except 2 position |
Below 1 V |
|||
| R (O2-9) - E1 (O1-1) |
L - W-B |
R shift position switch signal |
Ignition switch ON and shift lever R position |
11 to 14 V |
| Ignition switch ON and shift lever except R position |
Below 1 V |
|||
| 3 (O2-12) - E1 (O1-1) |
B - W-B |
3 shift position switch signal |
Ignition switch ON and shift lever 3 position |
11 to 14 V |
| Ignition switch ON and shift lever except 3 position |
Below 1 V |
|||
| STP (O3-14) - E1 (O1-1) |
Y - W-B |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| Brake pedal is released |
Below 1.5 V |
|||
| S2 (O1-17) - E1 (O1-1) |
P - W-B |
S2 solenoid signal |
2nd or 3rd gear |
11 to 14 V |
| 1st or 4th gear |
Below 1 V |
|||
| S1 (O1-18) - E1 (O1-1) |
LG - W-B |
S1 solenoid signal |
1st or 2nd gear |
11 to 14 V |
| 3rd or 4th gear |
Below 1 V |
|||
| SLT+ (O1-20) - SLT- (O1-19) |
V - W |
SLT solenoid signal |
Engine idling |
Pulse generation (See waveform 1) |
| SL (O1-16) - E1 (O1-1) |
GR - W-B |
SL solenoid signal |
Ignition switch ON |
Below 1.5 V |
| Vehicle driving under lock-up position |
11 to 14 V |
|||
| THOC (O1-24) - E2 (O1-23) |
L - Y |
ATF temperature sensor signal |
No. 1 ATF temperature: 115°C (239°F) or more |
Below 1.5 V |
| SP2+ (O1-30) - SP2- (O1-29) |
R - G |
Speed sensor (SP2) signal |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (See waveform 3) |
| NC0+ (O1-3) - NC0- (O1-2) |
L - Y |
Speed sensor (NC0) signal |
Engine idling (P or N position) |
Pulse generation (See waveform 2) |
| NSW (O1-12) - E1 (O1-1) |
B - W-B |
Park neutral switch signal |
Ignition switch ON and shift lever P and N position |
Below 2 V |
| Ignition switch ON and shift lever except P and N position |
11 to 14 V |
|||
| STA (O1-11) - E1 (O1-1) |
R - W-B |
Starter signal |
Cranking (shift lever position P or N position, engine Start) |
6 V or more |
| Ignition switch ON and shift lever except P and N position |
11 to 14 V |
|||
| SPD1 (O3-25) - E1 (O1-1) |
P - W-B |
Speed signal from combination meter |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (See waveform 4) |
| BATT (O3-5) - E1 (O1-1) |
B - W-B |
Battery (for measuring battery voltage and for TCM memory) |
Always |
11 to 14 V |
| IG2 (O3-6) - E1 (O1-1) |
B - W-B |
Ignition switch |
Ignition switch ON |
11 to 14 V |
| CAN+ (O3-21) - E1 (O1-1) |
L - W-B |
CAN communication line |
Engine is stopped, ignition switch ON |
Pulse generation (See waveform 5) |
| CAN- (O3-20) - E1 (O1-1) |
Y - W-B |
CAN communication line |
Engine is stopped, ignition switch ON |
Pulse generation (See waveform 6) |
Waveform 1

Reference: Terminal
SLT+ - SLT-
Tool setting
5 V/DIV., 1ms/DIV.
Vehicle condition
Engine idling
Waveform 2

Reference: Terminal
NC0+ - NC0-
Tool setting
5 V/DIV., 0.5 ms/DIV.
Vehicle condition
Engine idling (P or N position)
Waveform 3

Reference: Terminal
SP2+ - SP2-
Tool setting
2 V/DIV., 20 ms/DIV.
Vehicle condition
Vehicle speed 20 km/h (12 mph)
Waveform 4

Reference: Terminal
SPD1 - E1
Tool setting
5 V/DIV., 20 ms/DIV.
Vehicle condition
Vehicle speed 20 km/h (12 mph)
Waveform 5

Reference: Terminal
CAN+ - E1
Tool setting
1 V/DIV., 10 ms/DIV.
Vehicle condition
Engine is stopped, ignition switch ON
Waveform 6

Reference: Terminal
CAN- - E1
Tool setting
1 V/DIV., 10 ms/DIV.
Vehicle condition
Engine is stopped, ignition switch ON