2014-2019 Hiace · Service Manual TRANSMISSION

TERMINALS OF ECU

System information · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


ECM (for 1KD-FTV w/ DPF)
C176147E29

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.

Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
NSW (D99-38) - E1 (D99-109)
B - W-B
Park neutral switch signal
Ignition switch ON and shift lever P and N position
Below 2 V
Ignition switch ON and shift lever except P and N position
11 to 14 V
STP (B73-35) - E1 (D99-109)
Y - W-B
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
CAN+ (D99-40) - E1 (D99-109)
L - W-B
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 5)
CAN- (D99-63) - E1 (D99-109)
Y - W-B
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 6)
TC (B73-26) - E1 (D99-109)
G - W-B
Terminal TC of DLC3
Ignition switch ON
11 to 14 V

ECM (for 1KD-FTV w/o DPF)
C176147E30

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.

Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
NSW (D98-38) - E1 (D98-109)
B - W-B
Park neutral switch signal
Ignition switch ON and shift lever P and N position
Below 2 V
Ignition switch ON and shift lever except P and N position
11 to 14 V
STP (B72-35) - E1 (D98-109)
Y - W-B
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
CAN+ (D98-40) - E1 (D98-109)
L - W-B
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 5)
CAN- (D98-63) - E1 (D98-109)
Y - W-B
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 6)
TC (B72-26) - E1 (D98-109)
G - W-B
Terminal TC of DLC3
Ignition switch ON
11 to 14 V

ECM (for 2KD-FTV)
C176147E31

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.

Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
NSW (D105-38) - E1 (D105-109)
B - BR
Park neutral switch signal
Ignition switch ON and shift lever P and N position
Below 2 V
Ignition switch ON and shift lever except P and N position
11 to 14 V
STP (B88-35) - E1 (D105-109)
Y - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
CAN+ (B88-4) - E1 (D105-109)
L - BR
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 5)
CAN- (B88-5) - E1 (D105-109)
Y - BR
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 6)
TC (B88-26) - E1 (D105-109)
G - BR
Terminal TC of DLC3
Ignition switch ON
11 to 14 V

TCM
*1: w/ Flex Lock Up
*2: w/o Flex Lock Up
C109042E01

HINT:
Each TCM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the TCM terminals.

Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
P (O1-13) - E1 (O1-1)
W - W-B
P shift position switch signal
Ignition switch ON and shift lever P position
11 to 14 V
Ignition switch ON and shift lever except P position
Below 1 V
N (O1-14) - E1 (O1-1)
GR - W-B
N shift position switch signal
Ignition switch ON and shift lever N position
11 to 14 V
Ignition switch ON and shift lever except N position
Below 1 V
D (O2-8) - E1 (O1-1)
W - W-B
D shift position switch signal
Ignition switch ON and shift lever D or 3 position
11 to 14 V
Ignition switch ON and shift lever except D or 3 position
Below 1 V
L (O2-10) - E1 (O1-1)
R - W-B
L shift position switch signal
Ignition switch ON and shift lever L position
11 to 14 V
Ignition switch ON and shift lever except L position
Below 1 V
2 (O2-11) - E1 (O1-1)
Y - W-B
2 shift position switch signal
Ignition switch ON and shift lever 2 position
11 to 14 V
Ignition switch ON and shift lever except 2 position
Below 1 V
R (O2-9) - E1 (O1-1)
L - W-B
R shift position switch signal
Ignition switch ON and shift lever R position
11 to 14 V
Ignition switch ON and shift lever except R position
Below 1 V
3 (O2-12) - E1 (O1-1)
B - W-B
3 shift position switch signal
Ignition switch ON and shift lever 3 position
11 to 14 V
Ignition switch ON and shift lever except 3 position
Below 1 V
STP (O3-14) - E1 (O1-1)
Y - W-B
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
S2 (O1-17) - E1 (O1-1)
P - W-B
S2 solenoid signal
2nd or 3rd gear
11 to 14 V
1st or 4th gear
Below 1 V
S1 (O1-18) - E1 (O1-1)
LG - W-B
S1 solenoid signal
1st or 2nd gear
11 to 14 V
3rd or 4th gear
Below 1 V
SLT+ (O1-20) - SLT- (O1-19)
V - W
SLT solenoid signal
Engine idling
Pulse generation
(See waveform 1)
SLU+ (O1-21) - SLU- (O1-22)
B - L
SLU solenoid signal*1
Engine idling
Pulse generation
(See waveform 7)
SL (O1-16) - E1 (O1-1)
GR - W-B
SL solenoid signal*2
Ignition switch ON
Below 1.5 V
Vehicle driving under lock-up position
11 to 14 V
THOC (O1-24) - E2 (O1-23)
L - Y
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
THO (O1-25) - E2 (O1-23)
GR - Y
No. 1 ATF temperature sensor signal*1
ATF temperature: 115°C (239°F) or more
Below 1.5 V
SP2+ (O1-30) - SP2- (O1-29)
R - G
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 3)
NC0+ (O1-3) - NC0- (O1-2)
L - Y
Speed sensor (NC0) signal
Engine idling (P or N position)
Pulse generation
(See waveform 2)
NSW (O1-12) - E1 (O1-1)
B - W-B
Park neutral switch signal
Ignition switch ON and shift lever P and N position
Below 2 V
Ignition switch ON and shift lever except P and N position
11 to 14 V
STA (O1-11) - E1 (O1-1)
R - W-B
Starter signal
Cranking (shift lever position P or N position, engine Start)
6 V or more
Ignition switch ON and shift lever except P and N position
11 to 14 V
SPD1 (O3-25) - E1 (O1-1)
P - W-B
Speed signal from combination meter
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 4)
BATT (O3-5) - E1 (O1-1)
B - W-B
Battery (for measuring battery voltage and for TCM memory)
Always
11 to 14 V
IG2 (O3-6) - E1 (O1-1)
B - W-B
Ignition switch
Ignition switch ON
11 to 14 V
CAN+ (O3-21) - E1 (O1-1)
L - W-B
CAN communication line
Engine is stopped, ignition switch ON
Pulse generation
(See waveform 5)
CAN- (O3-20) - E1 (O1-1)
Y - W-B
CAN communication line
Engine is stopped, ignition switch ON
Pulse generation
(See waveform 6)

  1. G023426E18
    Waveform 1
    Reference: 
    Terminal
    SLT+ - SLT-
    Tool setting
    5 V/DIV., 1ms/DIV.
    Vehicle condition
    Engine idling

  2. G034873E04
    Waveform 2
    Reference: 
    Terminal
    NC0+ - NC0-
    Tool setting
    5 V/DIV., 0.5 ms/DIV.
    Vehicle condition
    Engine idling (P or N position)

  3. G020664E17
    Waveform 3
    Reference: 
    Terminal
    SP2+ - SP2-
    Tool setting
    2 V/DIV., 20 ms/DIV.
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)

  4. G034872E07
    Waveform 4
    Reference: 
    Terminal
    SPD1 - E1
    Tool setting
    5 V/DIV., 20 ms/DIV.
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)

  5. G036660E20
    Waveform 5
    Reference: 
    Terminal
    CAN+ - E1
    Tool setting
    1 V/DIV., 10 ms/DIV.
    Vehicle condition
    Engine is stopped, ignition switch ON

  6. G036661E19
    Waveform 6
    Reference: 
    Terminal
    CAN- - E1
    Tool setting
    1 V/DIV., 10 ms/DIV.
    Vehicle condition
    Engine is stopped, ignition switch ON

  7. C328323E02
    Waveform 7
    Reference: 
    Terminal
    SLU+ - SLU-
    Tool setting
    5 V/DIV., 1 ms/DIV.
    Vehicle condition
    Engine idling (P or N position)

← TERMINALS OF ECU (Oct 2014 – Dec 2016)DIAGNOSIS SYSTEM (Oct 2014 – Dec 2014) →