2014-2019 Hiace · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the intelligent tester on.

  1. Start and warm up the engine.

  1. Idle the engine.

  1. Select the menu items: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).

  1. Operate the camshaft timing oil control valve using the intelligent tester, and check the engine speed.

    Specified Condition:
    Tester Operation
    Specified Condition
    Camshaft timing oil control valve OFF
    Normal engine speed
    Camshaft timing oil control valve ON
    Engine idles roughly or stalls soon after OCV switched from OFF to ON

    If the result is not as specified, check the camshaft timing oil control valve, wire harness and ECM.

← COMPONENTS (from Jan 2015)ON-VEHICLE INSPECTION (from Jan 2015) →