2014-2019 Hiace · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. for Intake Side:

    1. Connect the GTS to the DLC3.

    2. Start the engine.

    3. Turn the GTS on.

    4. Warm up the engine.

    5. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1).

    6. Check the engine speed while operating the camshaft timing oil control valve using the GTS.

      Specified Condition:
      GTS Operation
      Specified Condition
      0%
      Normal engine speed
      100%
      Engine idles roughly or stalls

      If the result is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.

  1. for Exhaust Side:

    1. Connect the GTS to the DLC3.

    2. Start the engine.

    3. Turn the GTS on.

    4. Warm up the engine.

    5. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).

    6. Check the engine speed while operating the camshaft timing oil control valve using the GTS.

      Specified Condition:
      GTS Operation
      Specified Condition
      0%
      Normal engine speed
      100%
      Engine idles roughly or stalls

      If the result is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.

← ON-VEHICLE INSPECTION (Oct 2014 – Dec 2014)REMOVAL (Oct 2014 – Dec 2014) →