2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT KNOCK CONTROL SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (Ground) - 2 (Output)
    20°C (68°F)
    120 to 280 kΩ

    If the result is not as specified, replace the knock control sensor.

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2014) →