INSTALLATION
Removal / installation · Vehicles built from Jan 2017
| 1. INSTALL DIESEL THROTTLE BODY ASSEMBLY |
Connect the connector to install the emission control valve wire to the diesel throttle body assembly.
Install a new gasket and the diesel throttle body assembly with the 2 bolts and 2 nuts.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
Connect the connector and clamp.
| 2. INSTALL GAS FILTER BRACKET |
Install the gas filter bracket to the diesel throttle body assembly with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
| 3. INSTALL GAS FILTER |
Install the gas filter to the gas filter bracket.
Connect the 2 vacuum hoses to the turbo pressure sensor and intake manifold.
| 4. INSTALL INTERCOOLER AIR TUBE |
Install the intercooler air tube to the diesel throttle body assembly and tighten the hose clamp.
- Torque:
- 6.0 N*m{ 61 kgf*cm , 53 in.*lbf }
Connect the connector to the intake air temperature sensor.
Install the air tube support bracket with the 3 bolts.
- Torque:
- 6.0 N*m{ 61 kgf*cm , 53 in.*lbf }
| 5. INSTALL NO. 4 AIR HOSE |
Install the No. 4 air hose and tighten the 2 hose clamps.
- Torque:
- 6.0 N*m{ 61 kgf*cm , 53 in.*lbf }
Connect the oil return hose and slide the 2 clips to secure the hose.
| 6. PERFORM INITIALIZATION |
