2014-2019 Hiace · Service Manual TRANSMISSION

ON-VEHICLE INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2014


CHECK AUTOMATIC TRANSMISSION FLUID LEVEL

HINT:
  1. Drive the vehicle so that the engine and transmission are at the normal operating temperature.

    ATF temperature:
    70 to 80°C (158 to 176°F)

  2. The ATF temperature can be checked with the intelligent tester.
    Enter the following menus: Powertrain / Engine and ECT / Data List / A/T Oil Temperature 3.

  1. G036408E02
    Park the vehicle on a level surface and set the parking brake.
    Text in Illustration 
    *a
    OK
    *b
    Add

  1. With the engine idling and the brake pedal depressed, move the shift lever to all positions from P to L, and then return it to P.

  1. Pull out the dipstick and wipe it clean.

  1. Fully push the dipstick back into the pipe.

  1. Pull the dipstick out and check that the fluid level is in the HOT range.
    If there are leaks, it is necessary to repair or replace O-rings, seal packing, oil seals, plugs or other parts.

← P2769 Torque Converter Clutch Solenoid Circuit Low (Shift Solenoid Valve SL) (+ P2770) (Oct 2014 – Dec 2014)COMPONENTS (Oct 2014 – Dec 2014) →