2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT NO. 1 INTEGRATION RELAY (EFI MAIN)

  1. A225101E17
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    10B-1 - 10B-4
    Battery voltage not applied to terminals 10B-2 and 10B-3
    10 kΩ or higher
    Battery voltage applied to terminals 10B-2 and 10B-3
    Below 1 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (No. 1 Integration Relay)
    If the result is not as specified, replace the No. 1 integration relay.

← REMOVAL (from Oct 2014)INSTALLATION (from Oct 2014) →