2014-2019 Hiace · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


INSPECT SHIFT SOLENOID VALVE S1

  1. G038832E01
    Remove the shift solenoid valve S1.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance: 
    Tester Connection
    Specified Condition 20°C (68°F)
    Solenoid Connector (S1) - Solenoid Body (S1)
    11 to 15 Ω

  1. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

    OK:

    The solenoid makes an operating sound.


INSPECT SHIFT SOLENOID VALVE S2

  1. G038832E02
    Remove the shift solenoid valve S2.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance: 
    Tester Connection
    Specified Condition 20°C (68°F)
    Solenoid Connector (S2) - Solenoid Body (S2)
    11 to 15 Ω

  1. Connect the positive (+) lead to the terminal of the solenoid connector, and the negative (-) lead to the solenoid body.

    OK:

    The solenoid makes an operating sound.


INSPECT SHIFT SOLENOID VALVE SLT

  1. G020767E27
    Remove the shift solenoid valve (SLT).

  1. Measure the resistance according to the value(s) in the table below.

    Resistance: 
    Tester Connection
    Specified Condition 20°C (68°F)
    1 - 2
    5.0 to 5.6 Ω

  1. Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the valve.

    OK:

    The solenoid makes an operating sound.

← REMOVAL (from Jan 2017)INSPECTION (from Jan 2017) →