2014-2019 Hiace · Service Manual BRAKE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2017


OPERATION CHECK
  1. Disconnect the vacuum hose from the vacuum pump.

  1. C374023E01
    Connect the hose of the vacuum gauge to the vacuum pump.
    Text in Illustration 
    *a
    Vacuum Gauge

  1. Start the engine and warm it up for more than 2 minutes.

  1. With the engine idling, check the negative pressure of the vacuum pump.

    Standard pressure:
    Higher than 87 kPa (650 mmHg, 25.6 in.Hg)

    HINT:
    1. It is necessary to replace the vacuum pump every 200000 km (124000 miles).
    2. If the result is not as specified, replace the vacuum pump.

  1. Remove the vacuum gauge from the vacuum pump.

  1. Connect the vacuum hose to the vacuum pump.

← COMPONENTS (from Jan 2017)REMOVAL (from Jan 2017) →