REMOVAL
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE NO. 1 INTEGRATION RELAY |
Remove the junction block cover.
Using a screwdriver, detach the 2 claws and disconnect the No. 1 integration relay from the No. 1 junction block.

- HINT:
- Tape the screwdriver tip before use.
Disconnect the 3 connectors.
