2014-2019 Hiace · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE SYNCHRONIZER RING NO.2

  1. C067214
    Remove the synchronizer ring No.2.


2. REMOVE INPUT SHAFT BEARING

  1. C086536
    Remove the 13 input shaft bearings from the input shaft assembly.


3. REMOVE INPUT SHAFT FRONT BEARING

  1. C086532
    Using a snap ring expander, remove the snap ring.

  1. C086533
    Using SST and a press, remove the input shaft shim from the input shaft.
    SST
    09527-10011  

← COMPONENTS (from Oct 2014)INSPECTION (from Oct 2014) →