2014-2019 Hiace · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE LEVER LOCK PIN NO.2

  1. C112976
    Remove the nut from the lever lock pin No.2.

  1. C112977
    Using a brass bar and a hammer, remove the shift lever lock pin No.2.


2. REMOVE SELECT OUTER LEVER

  1. C112978
    Remove the select outer lever and washer from the select lever shaft sub-assembly.


3. REMOVE SELECT LEVER SHAFT SUB-ASSEMBLY

  1. C086521
    Remove the select lever shaft sub-assembly from the shift lever shaft housing.


4. REMOVE SHIFT OUTER LEVER LOCK PIN

  1. C112979
    Remove the nut from the shift outer lever lock pin.

  1. C112980
    Using a brass bar and a hammer, remove the shift outer lever lock pin.


5. REMOVE SHIFT OUTER LEVER NO.1

  1. C112981
    Remove the shift outer lever No.1 from the shift and select lever shaft.


6. REMOVE SHIFT LEVER BOOT

  1. C086525
    Remove the shift lever boot from the shift lever shaft housing.


7. REMOVE SHIFT AND SELECT LEVER SHAFT

  1. C086526
    Using a pin punch (5 mm) and a hammer, remove the shift lever shaft set slotted spring pin.

    NOTICE:
    Be careful not to damage the shift and select lever shaft.

  1. C086527
    Pull out the shift and select lever shaft and remove the shift and select lever.


8. REMOVE SELECT SPRING SEAT NO.1

  1. C086528
    Remove the select spring seat No.1 and spring from the shift lever shaft housing.


9. REMOVE REVERSE RESTRICT PIN NO.1

  1. C086529
    Using a hammer, drive a screw extractor into the reverse restrict pin slotted spring pin.

  1. Pull out the reverse restrict pin slotted spring pin from the shift lever shaft housing.

  1. C086530
    Remove the reverse restrict pin No.1 and spring from the shift lever shaft housing.


10. REMOVE SHIFT LEVER NO.2 SHAFT OIL SEAL

  1. C086531
    Using a screwdriver with its tip taped, remove the shift lever No.2 shaft oil seal from the shift lever shaft housing.

    NOTICE:
    Be careful not to damage shift lever shaft housing.


11. REMOVE SHIFT LEVER SHAFT OIL SEAL

  1. C086700
    Using a screwdriver with its tip taped, remove the shift lever shaft oil seal from the shift lever shaft housing.

    NOTICE:
    Be careful not to damage shift lever shaft housing.

← COMPONENTS (from Oct 2014)REASSEMBLY (from Oct 2014) →