REMOVAL
Removal / installation · Vehicles built from Apr 2016
Versions by build date: Oct 2014 – Mar 2016 from Apr 2016
| 1.
REMOVE FRONT DOOR SCUFF PLATE LH
|
 |
- Detach the 5 clips and remove the front door scuff plate LH.
| 2.
REMOVE FRONT DOOR OPENING TRIM LH |
|
| 3.
REMOVE SEAT BELT ANCHOR COVER
|
 |
- Remove the 2 clips.
Detach the claw and then remove the seat belt anchor cover.
| 4.
DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
|
 |
- Remove the bolt and disconnect the front seat outer belt assembly LH.
- Using a screwdriver, detach the 2 claws and open the cover.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration
*1
|
Protective Tape
|
- Remove the bolt and disconnect the front seat outer belt assembly LH.
| 5.
REMOVE CENTER PILLAR GARNISH COVER LOWER LH
|
 |
- Using a screwdriver, detach the 4 claws and remove the center pillar garnish cover lower LH.
- HINT:
- Tape the screwdriver tip before use.
| 6.
REMOVE SEAT ASSEMBLY LH
|
 |
Disconnect connector.
- Remove the nut and 3 bolts.
Remove the seat assembly LH.
| 7.
REMOVE CENTER PILLAR GARNISH LOWER LH (Semi Trim Type)
|
 |
- Using a screwdriver, detach the 4 clips and remove the center pillar garnish lower LH.
| 8.
REMOVE BACK DOOR SCUFF PLATE (Full Trim Type)
|
 |
- Detach the 7 clips and 4 claws and remove the back door scuff plate.
| 9.
REMOVE BACK DOOR WEATHERSTRIP (Full Trim Type) |
|
| 10.
REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Full Trim and Middle Roof Type)
|
 |
- Detach the 21 clips and remove the quarter trim panel assembly rear LH.
| 11.
REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (Full Trim and High Roof Type)
|
 |
- Detach the 35 clips and remove the quarter trim panel assembly rear LH.
| 12.
REMOVE SIDE NO.1 TRIM ASSEMBLY LH (Full Trim Type)
|
 |
- Detach the 21 clips and remove the side No. 1 trim assembly LH.
| 13.
REMOVE COOLER CONTROL SWITCH KNOB |
 |
- Remove the cooler control switch knob.
| 14.
REMOVE HEATER SWITCH ASSEMBLY |
 |
- Remove the 2 screws and heater switch assembly.