2014-2019 Hiace · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT HEATER CONTROL SWITCH
  1. Remove the heater control switch and disconnect the connector.

  1. E103713
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Switch position
    Specified condition
    Each terminal
    OFF
    10 kΩ or higher
    4 - 8
    LO
    Below 1 Ω
    1 - 4 - 8
    LO - ME
    Below 1 Ω
    1 - 4 - 8
    ME
    Below 1 Ω
    1 - 4 - 6 - 8
    ME - HI
    Below 1 Ω
    4 - 6 - 8
    HI
    Below 1 Ω

    If the resistance value is not as specified, replace the heater control switch.

← REMOVAL (from Apr 2016)INSTALLATION (Oct 2014 – Mar 2016) →