INSPECTION
Inspection · Vehicles built from Jan 2017
| INSPECT MAGNET CLUTCH ASSEMBLY |
![]() ![]() |
Check the magnet clutch operation.
Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.
If the operation is not as specified, replace the magnet clutch assembly.Text in Illustration *1
Magnet Clutch Rotor
*2
Magnet Clutch Hub
*a
Component without harness connected
(Magnet Clutch Assembly)
Measure the resistance between terminals 1 and 2.
- Standard resistance:
- 65 to 125 Ω at 20°C (68°F)


