DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE STARTER YOKE ASSEMBLY |
Remove the nut, and then disconnect the lead wire from terminal C.

Remove the 2 through bolts.
Pull out the starter yoke together with the starter armature.
Remove the O-ring from the starter yoke.
| 2. REMOVE MAGNET STARTER SWITCH ASSEMBLY |
![]() ![]() |
Remove the 2 screws and magnet starter switch.
Remove the idle gear, retainer, clutch roller, return spring and starter clutch from the starter drive housing.

Text in Illustration *1
Starter Drive Housing
*2
Starter Clutch
*3
Return Spring
*4
Clutch Roller
*5
Retainer
*6
Idle Gear
Using a magnet hand, remove the steel ball from the clutch.

Text in Illustration *1
Magnet Hand
| 3. REMOVE STARTER BRUSH HOLDER ASSEMBLY |
Remove the 2 screws and commutator end frame from the starter yoke.

Remove the O-ring from the starter yoke.
Disconnect the 4 brushes from the starter brush holder.
Using a screwdriver, hold back the brush spring.

Disconnect the brush from the brush holder.
Remove the brush holder from the starter yoke.
| 4. REMOVE STARTER ARMATURE ASSEMBLY |
Remove the starter armature from the starter yoke.

