2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT GLOW PLUG

A158384E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the glow plug terminal and glow plug body.

      NOTICE:
      Measure the resistance of the glow plug with it installed onto the cylinder head.

      Standard resistance:
      Approximately 0.95 Ω at 20 °C (68 °F)

      If the result is not as specified, replace the glow plug.

← REMOVAL (from Oct 2014)INSTALLATION (from Oct 2014) →