ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT REAR WASHER MOTOR |
Fill the washer tank with washer fluid.

- HINT:
- Operation should be performed with the rear washer motor installed to the washer tank assembly.
Apply battery voltage to the rear washer motor connector.
Check operation of the rear washer motor.
- OK:
Measurement condition
Specified condition
Battery positive (+) → Terminal 2
Battery positive (-) → Terminal 1
Washer fluid flows from washer tank
- NOTICE:
- Washer fluid will rush out when the motor operates. Take care so that the washer fluid does not get into your eyes.
