ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT FRONT WASHER MOTOR |
Fill the washer tank with washer fluid.

- HINT:
- Operation should be performed with the front washer motor installed to the washer tank assembly.
Apply battery voltage to the front washer motor connector.
Check operation of the front washer motor.
- OK:
Measurement condition
Specified condition
Battery positive (+) → Terminal 2
Battery positive (-) → Terminal 1
Washer fluid flows from washer tank
- NOTICE:
- Washer fluid will rush out when the motor operates. Take care so that the washer fluid does not get into your eyes.
