TORQUE SPECIFICATIONS
Specifications · Vehicles built from Oct 2014
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Generator coil assembly x Drive end frame |
5.8 |
59 |
51 in.*lbf |
| Generator rear end cover x Generator coil assembly |
4.6 |
47 |
41 in.*lbf |
| Generator w/ clutch pulley x Generator rotor assembly (For use with SST) |
87 |
891 |
64 |
| Generator bracket x Generator assembly and Cylinder block |
36 |
367 |
27 |
| Generator assembly x V-ribbed belt tensioner assembly |
62 |
632 |
46 |
| Idle No.2 pulley assembly x V-ribbed belt tensioner assembly |
45 |
459 |
33 |
| Generator wire x Terminal B |
9.8 |
100 |
87 in.*lbf |
| Compressor outlet elbow x V-ribbed belt tensioner assembly (Bolt A) |
12 |
122 |
9 |
| Compressor outlet elbow x Compressor elbow stay (Bolt B) |
32 |
326 |
24 |
| Compressor mounting bracket x Generator w/ vacuum pump |
47 |
475 |
36 |
| Generator wire x Terminal B |
9.8 |
100 |
87 in.*lbf |
| Vacuum pump x Union bolt |
14 |
891 |
64 |
| Generator bracket x Generator assembly and Cylinder block |
36 |
140 |
10 |
| Vacuum pump x Drive end frame |
7.8 |
80 |
69 in.*lbf |
| Terminal insulator x Rear end cover |
4.1 |
42 |
39 in.*lbf |
| Rear end cover x Plate terminal nut: |
4.4 |
45 |
87 in.*lbf |
| Rear end cover x Plate terminal bolt: |
3.8 |
39 |
34 in.*lbf |
| Regulator x Generator holder w/ rectifier |
2.0 |
20 |
18 in.*lbf |
| Brush holder x Generator holder w/ rectifier |
2.0 |
20 |
18 in.*lbf |
| Rectifier end frame x Generator holder w/ rectifier |
2.9 |
30 |
26 in.*lbf |
| Rectifier end frame x Cord clamp |
4.5 |
46 |
40 in.*lbf |
| Generator w/ vacuum pump assembly x Compressor mounting bracket bolt A: |
18 |
185 |
13 |
| Generator w/ vacuum pump assembly x Compressor mounting bracket bolt B: |
65 |
663 |
48 |